赶紧收藏,史上最全“涂层“标准!
2017-08-30 12:25:07 作者:本网整理 来源:南北潮 分享至:

1.jpg

 

涂层国家标准大全

 

编号

中文名称

GB/T 12754-2006

彩色涂层钢板及钢带

FZ/T 01003-1991

涂层织物厚度试验方法

FZ/T 01004-2008

涂层织物 抗渗水性的测定

FZ/T 01006-2008

涂层织物 涂层厚度的测定

FZ/T 01007-2008

涂层织物 耐低温性的测定

FZ/T 01008-2008

涂层织物 耐热空气老化性的测定

FZ/T 01010-1991

涂层织物涂层粘附强度测定方法

FZ/T 01011-1991

涂层织物耐磨性能测定方法

FZ/T 01052-1998

涂层织物 抗扭曲弯挠性能的测定

FZ/T 01063-2008

涂层织物 抗粘连性的测定

FZ/T 01065-2008

涂层及涂料染色和印花织物耐有机溶剂性的测定

FZ/T 01066-1999

涂层织物耐沾污性测定方法

FZ/T 75002-1993

涂层织物光加速老化试验方法氙弧法

FZ/T 75004-1993

涂层织物伸长和拉伸永久变形试验方法

FZ/T 75005-1994

涂层织物在无张力下尺寸变化的测定

FZ/T 75007-1995

涂层织物湿热空气加速老化试验方法

FZ/T 75008-1995

涂层织物缝孔撕破强度试验方法

GB 14443-2007

涂装作业安全规程 涂层烘干室安全技术规定

GB 8771-2007

铅笔涂层中可溶性元素最大限量

GB/T 11374-1989

热喷涂涂层厚度的无损测量方法

GB/T 11982.2-1996

聚氯乙烯卷材地板第2部分:有基材有背涂层聚氯乙烯卷材地板

GB/T 13448-2006

彩色涂层钢板及钢带试验方法

GB/T 14826-1993

色漆涂层粉化程度的测定方法及评定

GB/T 16935.3-2005

低压系统内设备的绝缘配合 第3部分:利用涂层、罐封和模压进行防污保护

GB/T 17456-1998

球墨铸铁管外表面喷锌涂层

GB/T 17459-1998

球墨铸铁管沥青涂层

GB/T 1766-1995

色漆和清漆涂层老化的评级方法

GB/T 18681-2002

热喷涂低压等离子喷涂镍-钴-铬-铝-钇-钽合金涂层

GB/T 18684-2002

锌铬涂层技术条件

GB/T 19823-2005

热喷涂工程零件热喷涂涂层的应用步骤

GB/T 20831-2007

电工钢片(带)层间绝缘涂层温度特性测试方法

GB/T 21073-2007

环氧涂层七丝预应力钢绞线

GB/T 2522-2007

电工钢片(带)表面绝缘电阻、涂层附着性测试方法

GB/T 4689.20-1996

皮革涂层粘着牢度测定方法

GB/T 5267.2-2002

紧固件非电解锌片涂层

GB/T 6843-1986

感光材料涂层熔点测定方法

GB/T 9265-1988

建筑涂料涂层耐碱性的测定

GB/T 9266-1988

建筑涂料涂层耐洗刷性的测定

GB/T 9272-2007

色漆和清漆 通过测量干涂层密度测定涂料的不挥发物体积分数

GB/T 9276-1996

涂层自然气候曝露试验方法

GB/T 9780-2005

建筑涂料涂层耐沾污性试验方法

HG/T 2095-1991

涂层尿素

HG/T 2471-2001

电解槽金属阳极涂层

JB/T 10394.3-2002

涂装设备通用技术条件 第3部分:涂层

JB/T 10458-2004

机械设备抗高温氧化涂层 技术条件

JB/T 10580-2006

热喷涂涂层命名方法

JB/T 10619-2006

无铬锌铝涂层 技术条件

JB/T 10621-2006

带钢连续热镀锌沉没辊及稳定辊热喷涂层 技术条件

JB/T 3578-2007

滑动导轨环氧涂层材料 技术通则

JB/T 3579-2007

环氧涂层滑动导轨 通用技术条件

JB/T 6075-1992

氮化钛涂层 金相检验方法

JB/T 7501-1994

湿热环境典型机械产品有机涂层 技术条件

JB/T 7703-1995

热喷涂陶瓷涂层 技术条件

JB/T 8320-1996

电力半导体器件工艺用涂层石英玻璃管

JB/T 8365-1996

氮化钛涂层高速钢刀具 技术规范

JB/T 8424-1996

金属覆盖层和有机涂层 天然海水腐蚀试验方法

JB/T 8427-1996

钢结构腐蚀防护热喷涂锌、铝及其合金涂层选择与应用导则

JB/T 8926-1999

火焰喷钼涂层的检验方法

JB/T 8927-1999

铝及铝合金等离子体增强电化学表面陶瓷化(PECC)膜/有机涂层

JC/T 1015-2006

环氧树脂地面涂层材料

QB/T 1551-1992

灯具油漆涂层

QB/T 1552-1992

照明灯具反射器油漆涂层技术条件

QB/T 2002.2-1994

皮革五金配件表面喷涂层技术条件

QB/T 2899-2007

计时仪器 辐射发光涂层检验条件

QC/T 484-1999(2005)

汽车 油漆涂层

QC/T 721-2004

汽车用锌铝铬涂层

SH/T 3540-2007

钢制换热设备管束复合涂层施工及验收规范

SY/T 0315-2005

钢质管道单层熔结环氧粉末外涂层技术规范

SY/T 0442-1997(2005)

钢质管道熔结环氧粉末内涂层技术标准

SY/T 0544-2004

石油钻杆内涂层技术条件

SY/T 4076-1995

钢质管道液体涂料内涂层风送挤涂工艺

SY/T 4078-1995

钢质管道内涂层液体涂料补口机补口工艺

SY/T 4107-2005

复合防腐涂层各层厚度破坏性测量方法

SY/T 4113-2007

防腐涂层的耐划伤试验方法

SY/T 6530-2002

非腐蚀性气体输送用管线管内涂层

XB/T 607-2003

汽油车排气净化催化剂涂层材料试验方法

YB/T 5214-2007

抗氧化涂层石墨电极

YS/T 431-2000(2005)

铝及铝合金彩色涂层板、带材

YS/T 541-2006

金属热喷涂层表面洛氏硬度试验方法

YS/T 542-2006

热喷涂层抗拉强度的测定

YS/T 550-2006

金属热喷涂层剪切强度的测定

 

涂层国际标准大全

 

编号

中文名称

英文名称

IEC 60404-12-1992

磁性材料 第12部分:层间绝缘涂层的温度能力的评定方法的指南

Magnetic materials; part 12: guide to methods of assessment of temperature capability of interlaminar insulation coatings

IEC 60664-3-2003

低压系统内设备的绝缘配合.第3部分:防污染用铸封或压模涂层的使用

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

IEC 60684-3-300-2002

绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻璃纤维编织软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated

IEC 60684-3-343 to 345-2002

绝缘软管.第3部分:各种型号软管规范.第343至345篇:无涂层可扩张编织的乙烯三氟氯乙烯纤维软管

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

IEC 61249-5-1-1995

互连结构用材料 第5部分:有或无涂层的导电箔和薄膜分规范集 第1节:铜箔(用于生产覆铜基材)

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials)

IEC 61249-5-4-1996

互连结构用材料 第5部分:有或无涂层的导电箔和薄膜分规范集 第4节:导电油墨

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks

IEC 61249-8-7-1996

互连结构用材料 第8部分:非导电薄膜和涂层分规范集 第7节:打印油墨

Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: MaRKing legend inks

IEC 61249-8-8-1997

互连结构用材料 第8部分:非导电薄膜和涂层分规范集 第8节:非永久高聚物涂层

Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings

IEC/TR 60344-2007

低频电缆和电线未涂层和涂层铜导线的直流电阻计算.应用指南

Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

ISO 10247 AMD 1-2006

传送带.涂层特性.分类.修改件1

Conveyor belts - Characteristics of covers - Classification; Amendment 1

ISO 105-X10-1993

纺织品 色牢度试验 第X10部分:纺织品颜色向聚氯乙烯涂层迁移的评定

Textiles; tests for colour fastness; part X10: assessment of migration of textile colours into polyvinyl chloride coatings

ISO 10684-2004

紧固件.热浸镀锌涂层

Fasteners - Hot dip galvanized coatings

ISO 11507-2007

色漆和清漆.暴露涂层到人工风化环境.暴露在荧光紫外线灯和水环境

Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water

ISO 11644-1993

皮革 涂层粘着牢度测定方法

Leather; test for adhesion of finish

ISO 11950-1995

冷轧电镀铬/氧化铬涂层钢板

Cold-reduced electrolytic chromium/chromium oxide-coated steel

ISO 11998-2006

色漆和清漆.测定涂层的耐湿性和清洁度

Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings

ISO 12683-2004

机械镀锌涂层.规范和试验方法

Mechanically deposited coatings of zinc - Specification and test methods

ISO 13779-2-2000

外科植入物 羟基磷灰石 第2部分:羟基磷灰石覆涂层

Implants for surgery - Hydroxyapatite - Part 2: Coatings of hydroxyapatite

ISO 13779-4-2002

外科植入物.羟磷灰石.第4部分:涂层粘结强度的测定

Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength

ISO 14373-2006

电阻焊接.无涂层和有涂层低碳钢的点焊程序

Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels

ISO 14654-1999

钢筋混凝土用环氧树脂涂层钢

Epoxy-coated steel for the reinforcement of concrete

ISO 14655-1999

预应力混凝土用环氧树脂涂层钢绞线

Epoxy-coated strand for the prestressing of concrete

ISO 14656-1999

钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料

Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete

ISO 14788-2005

连续热浸镀锌(5%)铝合金涂层钢薄板

Continuous hot-dip zinc-5% aluminium alloy coated steel sheet

ISO 14923-2003

热喷涂.热喷涂层的表征和试验

Thermal spraying - Characterization and testing of thermally sprayed coatings

ISO 14924-2005

热喷涂.热喷涂层的后处理和加工

Thermal spraying - Post-treatment and finishing of thermally sprayed coatings

ISO 15234-1999

色漆和清漆 甲醛涂层和三聚氰胺涂层的试验 小型试验室中甲醛浓度的测定

Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber

ISO 15720-2001

金属涂层 孔隙率检测 用涂胶块阳极电解法检测基体上金或钯涂层的孔隙率

Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

ISO 15721-2001

金属涂层 孔隙率检测 用硫酸/二氧化硫蒸汽法检测基体上金或钯涂层的孔隙率

Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

ISO 15741-2001

色漆和清漆 海上和近海的非腐蚀气体钢管内侧的减小摩擦涂层

Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases

ISO 16053-2004

涂料和清漆.外部木材用涂层材料和涂覆系统.自然老化试验

Paints and varnishes - Coating materials and coating systems for exterior wood - NatuRAL weathering test

ISO 16172-2006

波纹钢管用连续热浸金属涂层钢板

Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe

ISO 16276-1-2007

防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂应力)的评定和验收标准.第1部分:脱落测试

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing

ISO 16276-2-2007

防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂应力)的评定和验收标准.第2部分:划格测试和X切割测试

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing

ISO 16773-1-2007

涂料和清漆.高阻抗涂层样品的电化学阻抗频谱(EIS).第1部分:术语和定义

Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions

ISO 16773-2-2007

油漆及清漆.高阻抗涂层试样的电化学阻抗谱(EIS).第2部分:数据采集

Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data

ISO 16962-2005

表面化学分析.用辉光放电光发射光谱测定法分析锌和/或铝基金属涂层

Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry

ISO 17233-2002

皮革.物理和机械试验.表面涂层冷裂温度的测定

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings

ISO 17834-2003

热喷涂.高温下抗腐蚀耐氧化保护涂层

Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures

ISO 17872-2007

色漆和清漆.腐蚀试验用金属板涂层划痕标记导则

Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 17925-2004

钢上锌和/或铝基涂层.单位面积涂层质量和化学组分的测定.重量分析法、感应耦合等离子体原子辐射光谱测定法

Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

ISO 20502-2005

细陶瓷(高级陶瓷、高级工业陶瓷).用划痕试验测定陶瓷涂层的粘附性

Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing

ISO 20566-2005

色漆和清漆.用实验室洗车台测定涂层系统耐划痕性

Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash

ISO 20567-1-2005

色漆和清漆.涂层的耐石片划性的测定.第1部分:多冲击试验

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing

ISO 20567-2-2005

色漆和清漆.涂层的耐石片划性的测定.第2部分:导向冲击体单冲击试验

Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body

ISO 2063-2005

热喷镀.金属涂层和其他无机覆层.锌、铝及其合金

Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys

ISO 22168-2006

道路车辆.影响光源光色的涂层的保持试验.试验方法

Road vehicles - Holding test of coatings influencing the colour of light emitted by light source(s) - Test methods

ISO 22778-2006

金属涂层.在铁和钢表面上物理蒸发镉沉淀涂层.规范和试验方法

Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods

ISO 22779-2006

金属涂层.铝的物理蒸汽沉积涂层法.规范和试验方法

Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods

ISO 2411-2000

橡胶或塑料涂覆织物 涂层粘合强度的测定

Rubber- or plastics-coated fabrics - Determination of coating adhesion

ISO 2810-2004

色漆与清漆.涂层的自然风化.暴露和评定

Paints and varnishes - Natural weathering of coatings - Exposure and assessment

ISO 3185-1993

航空航天 强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型的普

Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 3186-1994

航空航天 强度等级1250 MPa~1800 MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、大径

Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions

ISO 3193 Technical Corrigendum 1-1992

航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普

Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1

ISO 3193-1991

航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普

Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 3202-1997

航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、带内偏高扭矩十字槽或不打滑扳动结

Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions

ISO 3203-1993

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通双

Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 5470-2-2003

橡胶或塑料涂层织物.耐磨损性测定.第2部分:马丁代尔研磨器

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader

ISO 5856-1991

航空航天 强度等级小于或等于1100 MPa、金属材料制成、有涂层或无涂层、带有中或短长度MJ螺纹、大径杆型及

Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 6451-1982

塑料涂覆织物 聚氯乙烯涂层 熔融快速检验法

Plastics coated fabrics; Polyvinyl chloride coatings; Rapid method for checking fusion

ISO 6452-2007

橡胶或塑料涂层织物.汽车内装饰材料雾气凝结特征的测定

Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles

ISO 7590-2001

钢丝绳芯输送带 总粗度及涂层厚度测定方法

Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness

ISO 7623-1996

钢丝绳芯输送带 绳芯与涂层之间粘合力试验 原始试验和热处理

Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment

ISO 7989-1-2006

钢丝和钢丝制品.钢丝的有色金属涂层

Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles

ISO 7989-2-2007

钢丝和钢丝制品.钢丝的有色金属涂层.第2部分:锌或锌合金涂层

Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating

ISO 8078-1984

航空航天工艺 铝合金的阳极化处理 无着色涂层的硫酸工艺规程

Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating

ISO 8079-1984

航空航天工艺 铝合金的阳极化处理 带着色涂层的硫酸工艺规程

Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating

ISO 8094-1984

钢丝绳芯输送带 绳芯与涂层间粘合强度试验

Steel cord conveyor belts; Adhesion strength test of the cover to the core layer

ISO 8096 Technical Corrigendum 1-2005

防水服用橡胶或塑料涂层织物.规范.技术勘误1

Rubber- or plastics-coated fabrics for water-resistant clothing - Specification; Technical Corrigendum 1

ISO 8179-2-1995

球墨铸铁管 外部镀锌 第2部分:终饰层用富锌涂层

Ductile iron pipes - External zinc coating - Part 2: Zinc rich paint with finishing layer

ISO 8501-1-2007

涂料和相关产品使用前钢衬底的制备.表面清洁度的目测评估.第1部分:未涂覆钢衬底和彻底清除原有涂层后钢衬底

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings

ISO 8501-2-1994

涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级

Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings

ISO 8980-4-2006

眼科光学.半成品眼镜片.第4部分:防反射涂层的规范和试验方法

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings

ISO 9211-1-1994

光学和光学仪器 光学涂层 第1部分:定义

Optics and optical instruments - Optical coatings - Part 1: Definitions

ISO 9211-2-1994

光学和光学仪器 光学涂层 第2部分:光学特性

Optics and optical instruments - Optical coatings - Part 2: Optical properties

ISO 9211-3-1994

光学和光学仪器 光学涂层 第3部分:环境稳定性

Optics and optical instruments - Optical coatings - Part 3: Environmental durability

ISO 9211-4-2006

光学和光学仪器.光学涂层.第4部分:规定的试验方法

Optics and optical instruments - Optical coatings - Part 4: Specific test methods

ISO 9254-1993

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通在

Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9255-1993

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、普通在

Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9256-1993

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、大六角

Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions

ISO 9514-2005

色漆和清漆.多组分涂层系统适用期测定.样品的制备和处理以及试验指南

Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing

 

 

更多关于材料方面、材料腐蚀控制、材料科普等方面的国内外最新动态,我们网站会不断更新。希望大家一直关注中国腐蚀与防护网http://www.ecorr.org


责任编辑:王元


《中国腐蚀与防护网电子期刊》征订启事


投稿联系:编辑部


电话:010-62313558-806


邮箱:fsfhzy666@163.com


中国腐蚀与防护网官方 QQ群:140808414

免责声明:本网站所转载的文字、图片与视频资料版权归原创作者所有,如果涉及侵权,请第一时间联系本网删除。